slapd-relay(5)
NAME
slapd-relay - relay backend to slapd
SYNOPSIS
/etc/openldap/slapd.conf
DESCRIPTION
The primary purpose of this slapd(8) backend is to map a naming context
defined in a database running in the same slapd(8) instance into a vir-
tual naming context, with attributeType and objectClass manipulation,
if required. It requires the slapo-rwm(5) overlay.
This backend and the above mentioned overlay are experimental.
CONFIGURATION
The following slapd.conf directives apply to the relay backend data-
base. That is, they must follow a "database relay" line and come
before any subsequent "backend" or "database" lines. Other database
options are described in the slapd.conf(5) manual page; only the suffix
directive is allowed by the relay backend.
relay <real naming context>
The naming context of the database that is presented under a
virtual naming context. The presence of this directive implies
that one specific database, i.e. the one serving the real naming
context, will be presented under a virtual naming context.
MASSAGING
The relay database does not automatically rewrite the naming context of
requests and responses. For this purpose, the slapo-rwm(5) overlay
must be explicitly instantiated, and configured as appropriate. Usu-
ally, the rwm-suffixmassage directive suffices if only naming context
rewriting is required.
ACCESS RULES
One important issue is that access rules are based on the identity that
issued the operation. After massaging from the virtual to the real
naming context, the frontend sees the operation as performed by the
identity in the real naming context. Moreover, since back-relay
bypasses the real database frontend operations by short-circuiting
operations through the internal backend API, the original database
access rules do not apply but in selected cases, i.e. when the backend
itself applies access control. As a consequence, the instances of the
relay database must provide own access rules that are consistent with
those of the original database, possibly adding further specific
restrictions. So, access rules in the relay database must refer to
identities in the real naming context. Examples are reported in the
EXAMPLES section.
SCENARIOS
If no relay directive is given, the relay database does not refer to
any specific database, but the most appropriate one is looked-up after
rewriting the request DN for the operation that is being handled.
This allows to write carefully crafted rewrite rules that cause some of
the requests to be directed to one database, and some to another; e.g.,
authentication can be mapped to one database, and searches to another,
or different target databases can be selected based on the DN of the
request, and so.
Another possibility is to map the same operation to different databases
based on details of the virtual naming context, e.g. groups on one
database and persons on another.
EXAMPLES
To implement a plain virtual naming context mapping that refers to a
single database, use
database relay
suffix "dc=virtual,dc=naming,dc=context"
relay "dc=real,dc=naming,dc=context"
overlay rwm
rwm-suffixmassage "dc=real,dc=naming,dc=context"
To implement a plain virtual naming context mapping that looks up the
real naming context for each operation, use
database relay
suffix "dc=virtual,dc=naming,dc=context"
overlay rwm
rwm-suffixmassage "dc=real,dc=naming,dc=context"
This is useful, for instance, to relay different databases that share
the terminal portion of the naming context (the one that is rewritten).
To implement the old-fashioned suffixalias, e.g. mapping the virtual to
the real naming context, but not the results back from the real to the
virtual naming context, use
database relay
suffix "dc=virtual,dc=naming,dc=context"
relay "dc=real,dc=naming,dc=context"
overlay rwm
rwm-rewriteEngine on
rwm-rewriteContext default
rwm-rewriteRule "dc=virtual,dc=naming,dc=context"
"dc=real,dc=naming,dc=context" ":@"
rwm-rewriteContext searchFilter
rwm-rewriteContext searchEntryDN
rwm-rewriteContext searchAttrDN
rwm-rewriteContext matchedDN
Note that the slapo-rwm(5) overlay is instantiated, but the rewrite
rules are written explicitly, rather than automatically as with the
rwm-suffixmassage statement, to map all the virtual to real naming con-
text data flow, but none of the real to virtual.
Access rules:
database bdb
suffix "dc=example,dc=com"
# skip...
access to dn.subtree="dc=example,dc=com"
by dn.exact="cn=Supervisor,dc=example,dc=com" write
by * read
database relay
suffix "o=Example,c=US"
relay "dc=example,dc=com"
overlay rwm
rwm-suffixmassage "dc=example,dc=com"
# skip ...
access to dn.subtree="o=Example,c=US"
by dn.exact="cn=Supervisor,dc=example,dc=com" write
by dn.exact="cn=Relay Supervisor,dc=example,dc=com" write
by * read
Note that, in both databases, the identities (the <who> clause) are in
the real naming context, i.e. `dc=example,dc=com', while the targets
(the <what> clause) are in the real and in the virtual naming context,
respectively.
ACCESS CONTROL
The relay backend does not honor any of the access control semantics
described in slapd.access(5); all access control is delegated to the
relayed database(s). Only read (=r) access to the entry pseudo-
attribute and to the other attribute values of the entries returned by
the search operation is honored, which is performed by the frontend.
FILES
/etc/openldap/slapd.conf
default slapd configuration file
SEE ALSO
slapd.conf(5), slapd-config(5), slapo-rwm(5), slapd(8).
OpenLDAP 2.4.36 2013/08/17 SLAPD-RELAY(5)
Man(1) output converted with
man2html