DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 
Modems

Smartmodem 2400, V-series 9600 or compatible

The Hayes 2400 and V-series 9600 Smartmodem or AT-compatible modems are supported and are configured automatically when you use the dialer entries or dialer programs supplied with the SCO OpenServer distribution. If you are using an unsupported dialer (one brought from elsewhere or written yourself), and you plan to use it for a dial-in line, be sure that you use the following settings:


AT&f
fetches factory configuration

ATT
is tone dialing

ATl0
is low speaker volume

AT&d2
sets dtr ``2'': goes on hook when dtr drops

AT&c1
sets dcd ``1'': dcd tracks remote carrier

ATs0=1
answers phone after one ring (AA light should come on)

ATs2=128
disables modem escape sequence

ATe0
does not echo (modem no longer echoes what is sent to it)

ATq1
is quiet mode (modem does not respond with ``OK'' after this command or any that follow)

AT&w
saves settings in non-volatile memory. If you do not want to save the settings, you do not have to enter this command.

Next topic: Telebit Trailblazer
Previous topic: AT-compatible switch settings

© 2005 The SCO Group, Inc. All rights reserved.
SCO OpenServer Release 6.0.0 -- 03 June 2005