Primary/Alternate adapter
This parameter applies to these adapters:
-
IBM Token-Ring Network PC Adapter
-
IBM Token-Ring Network PC Adapter II (long and short)
-
IBM Token-Ring Network 16/4 Adapter
-
IBM Token-Ring Network 16/4 ISA-16 Adapter
-
IBM Auto 16/4 Token-Ring Network ISA Adapter
-
IBM Token-Ring Network PC Adapter/A
-
IBM Token-Ring Network 16/4 Adapter/A
You can install up to two Token-Ring adapters in your system.
If you are using two adapters, make sure to use the
Primary-Alternate
switches on the adapters to set up one as the primary adapter
and the other as the alternate adapter.
You must also ensure that the adapters are designated as
``Primary'' or ``Alternate'' during configuration with the
Network Configuration Manager.
Obtain switch information for these adapters from the
documentation supplied by the adapter manufacturer.
© 2007 The SCO Group, Inc. All rights reserved.
SCO OpenServer Release 6.0.0 -- 05 June 2007