DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

Adding tape drives



Adding tape drives
        Installing a tape drive
                Installing a SCSI tape drive
                Installing a QIC-02 cartridge tape drive
                Installing an Irwin mini-cartridge tape drive
                Installing a QIC-40/80 floppy tape drive
                Installing a Compaq CPQS tape drive
        Changing the default tape drive
        Troubleshooting tape drives
                General problems with tape drives
                Problems with QIC-02 cartridge tape drives
                        QIC-02 cartridge tape drive not recognized at bootup
                        Use of interrupts with the Archive drive
                        Settings required by the Olivetti drive
                        Bad octal digit
                        Tape commands hang
                        Cannot open /dev/rct0 error message
                Problems with SCSI tape drives
                        SCSI tape drive not recognized
                        Cannot access SCSI tape drive with /dev/rct0
                        Using the dd(C) command with Exabyte 8mm tapes
                        Waiting for DAT and Exabyte 8mm tape drives to initialize
                Problems with Irwin and QIC-40/80 tape drives
                        Irwin or QIC-40/80 tape drive not recognized at bootup
                        Difficulty backing up Irwin and QIC-40/80 tape drives
                        Tape formatting fails
                        Incorrect device nodes for Wangtek QIC-80 tape drives

Index