DOC HOME
SITE MAP
MAN PAGES
GNU INFO
SEARCH
PRINT BOOK
Adding tape drives
Installing a tape drive
Installing a SCSI tape drive
Installing a QIC-02 cartridge tape drive
Installing an Irwin mini-cartridge tape drive
Installing a QIC-40/80 floppy tape drive
Installing a Compaq CPQS tape drive
Changing the default tape drive
Troubleshooting tape drives
General problems with tape drives
Problems with QIC-02 cartridge tape drives
QIC-02 cartridge tape drive not recognized at bootup
Use of interrupts with the Archive drive
Settings required by the Olivetti drive
Bad octal digit
Tape commands hang
Cannot open /dev/rct0 error message
Problems with SCSI tape drives
SCSI tape drive not recognized
Cannot access SCSI tape drive with /dev/rct0
Using the dd(C) command with Exabyte 8mm tapes
Waiting for DAT and Exabyte 8mm tape drives to initialize
Problems with Irwin and QIC-40/80 tape drives
Irwin or QIC-40/80 tape drive not recognized at bootup
Difficulty backing up Irwin and QIC-40/80 tape drives
Tape formatting fails
Incorrect device nodes for Wangtek QIC-80 tape drives