mount_cdfs(ADM)

Synopsis

Description

The CD-ROM media may or may not have values set for items such as the User ID (UID), Group ID (GID), permissions, etc. If a value is not recorded on the CD-ROM, a default value is assigned by the software. The default value is either taken from the /etc/conf/pack.d/cdfs/space.c file, or from the value specified with the -o option of the mount command.

Once the media is mounted, a default value can only be changed by using the cddevsuppl(1M) or cdmntsuppl(1M) commands, or by unmounting (or remounting) the media and specifying the desired values using the -o option.

cdfs-specific options

-F cdfs

Specify the cdfs FSType. If -F cdfs is not specified heuristics similiar to those used by fstyp(ADM) are used to determine the file system type.

---

NOTE: This command executes faster if it is not required to autodetect file system types. If possible, specify the -F cdfs.

---

The type "-F ISO9660,lower" is also accepted, but note the following option exceptions when using this file syetem type:

• The cdfs default is "relax", so that this option is silently ignored; however, there is no way to obtain non-relax behavior.

• The "search" option has been translated into "dsearch=x", which is an approximate equivalent.

• The "hide" and "write" options are not supported; they are ignored and a warning is printed.

-r

Mounts the filesystem as read-only. This option or the -o ro option is required.

-o

Specifies the cdfs-specific options in a comma-separated list of options from the list below. The following mount options are implicitly set when the CD is mounted without specifing the -o option:

• ro

• suid

• The extension related options susp, rrip, and joliet

• The values defined in the /etc/conf/pack.d/cdfs/space.c file.

The ISO-9660/High Sierra extension Enabling/Disabling options

• noextend

• susp | nosusp (the System Use Sharing Protocol -- SUSP)

• rrip | norrip the Rockridge Interchange Protocol -- RRIP)

• joliet | nojoliet (the Joliet extension)

have the following interactions when explicitly specifying the following options:

• Explicitly specifying noextend has the effect of Implicitly specifying all the extension Disabling options whose Disabling disposition has not been Explicitly specified (currently this is equivalent to setting susp, rrip, and joliet). noextend takes precedence over all the other extension Enabling/Disabling options and is is mutually exclusive with all the extension Enabling options (i.e. susp, rrip, and joliet).

• Explicitly specifying the extension Enabling option susp has the effect of Implicitly specifying the extension Enabling option of all SUSP compliant extensions whose Enabling/Disabling disposition has not been Explicitly specified (currently this applies only to the RRIP extension) and Implicitly specifying the extension Disabling option of all non-SUSP compliant extensions whose Enabling/Disabling disposition has not been Explicitly specified (currently this applies only to the Joliet extension).

• Explicitly specifying the extension Disabling option nosusp has the effect of Implicitly specifying the extension Disabling option of all SUSP compliant extensions whose Enabling/Disabling disposition has not been Explicitly specified (currently this applies only to the RRIP extension) and Implicitly specifying the extension Enabling option of all non-SUSP compliant extensions whose Enabling/Disabling disposition has not been Explicitly specified (currently this applies only to the Joliet extension).

• Explicitly specifying an SUSP compliant extension Enabling option has the effect of Implicitly specifying the extension Enabling option susp (currently this applies only to the RRIP extension).

The ISO-9660/High Sierra extension Enabling/Disabling options

• rrip | norrip

• joliet | nojoliet

have the following interactions with each other when they are Explicitly specifyied:

• Explicitly specifying an extension Enabling option has the effect of and Implicitly specifying the extension Disabling option of those extensions whose Enabling/Disabling disposition has not been Explicitly specified.

• Explicitly specifying an extension Disabling option has the effect of and Implicitly specifying the extension Enabling option of those extensions whose Enabling/Disabling disposition has not been Explicitly specified.

For example specifying the nojoliet mount option will have the effect of specifying the susp,rrip mount option.

The following are the cdfs_options to -o:

ro

Mounts the resource read-only. This option or the -r option are required.

suid | nosuid

Allows or disallows execution of Setuid programs. The default is suid.

susp | nosusp

Enables/disables the processing of all System Use Sharing Protocol (SUSP) compliant extensions to the ISO-9660/High Sierra specification. The SUSP defines a mechanism for which the System Use Area of a Directory Record may be shared by multiple independent organizations, for example, Rockridge Interchange Protocol (RRIP). The nosusp flag prevents the processing of all SUSP-compliant extensions, even if recorded on the media. The default is susp.

rrip | norrip

Enables/disables the processing of all the Rockridge Interchange Protocol (RRIP) extensions to the ISO-9660/High Sierra specification. The RRIP is a SUSP-compliant set of extensions that provide POSIX file semantics within the context of an ISO-9660/High Sierra filesystem. The rrip flag requires that the susp flag also be set. The norrip flag prevents the processing of all RRIP extensions even if recorded on the media. The default is rrip.

joliet | nojoliet

Enables/Disables the processing of the Joliet extensions to the ISO-9660/High Sierra specification. Joliet utilizes the Supplementary Volume Descriptor (SVD) feature of the ISO-9660/High Sierra specification to manage a Directory Hierarchy and by doing so eliminates several ISO-9660/High Sierra restrictions such as File/Directory Identifiers lengths, character sets (Identifiers are recored within the Unicode (i.e. ISO10646) character set), and Directory Hierarch depth. The default is joliet.

noextend

Disallows the processing of all extensions to the ISO-9660/High Sierra specification (SUSP and non-SUSP alike), even if recorded on the media. Currently, noextend is equivalent to nosusp, norrip, nojoliet. However, noextend will apply to future ISO-9660/High Sierra extensions.

lsectsz=<value>

Defines the logical sector size of the media, as defined by the ISO-9660 and/or the High Sierra specifications. If not specified, the system will automatically determine the logical sector size of the media. The user need not specify this option. However, if specified, the value must exactly match the media being mounted.

uid=owner

Defines the default UID to be used for the files and/or directories that do not have a UID recorded on the CD-ROM. owner is a numeric UID value or a user name. See the cdmntsuppl(1M) command for more information. The default is defined by variable cdfs_InitialUID in /etc/conf/pack.d/cdfs/space.c.

gid=group

Defines the default GID to be used for the files and/or directories that do not have a GID recorded on the CD-ROM. group is a numeric GID value or a group name. See the cdmntsuppl(1M) command in the X/Open CD-ROM Support Component Preliminary Specification for more information. The default is defined by variable cdfs_InitialGID in /etc/conf/pack.d/cdfs/space.c.

fperm=mode

Defines the default file permissions to be used for the files that do not have permissions recorded on the CD-ROM. The value mode is an absolute value (a 4-digit octal), or symbolic value. See the chmod(C) and cdmntsuppl(1M) commands. The default is defined by variable cdfs_InitialFPerm in /etc/conf/pack.d/cdfs/space.c.

dperm=mode

Defines the default directory permissions to be used for the directories that do not have permissions recorded on the CD-ROM. The value mode is an absolute value (a 4-digit octal), or symbolic value. See the chmod(C) and cdmntsuppl(1M) commands. The default is defined by variable cdfs_InitialDPerm in /etc/conf/pack.d/cdfs/space.c.

uidmap=filename

Sets User ID mappings. The UID and user names associated with a file or directory on the CD-ROM might not be valid on the host system. The uidmap function maps the CD-ROM UIDs to valid host system UIDs.

Entries in filename are specified as the value recorded on the CD-ROM, colon (:), followed by the UID or user name as found in the user database. Multiple entries are separated by new lines.

For example, filename may contain the entries:

   1500:418
   1006:stanley

The first entry maps the UID of 1500 (on the CD-ROM) to a UID of 418. The second entry maps the UID of 1006 (on the CD-ROM) to the user named stanley. See the cdmntsuppl(1M) command.

The maximum number of mappings allowed is defined in sys/cdrom.h.

gidmap=filename

Sets Group ID mappings. The GID and group names associated with a file or directory on the CD-ROM might not be valid on the host system. The gidmap function maps the CD-ROM GIDs to valid host system GIDs.

Entries in filename are specified as the value recorded on CD-ROM, colon (:), followed by the GID or group name as found in the group database. Multiple entries are separated by new lines. See the cdmntsuppl(1M) command.

The maximum number of mappings allowed is defined in sys/cdrom.h.

nmconv=a

Sets the filename conversion mode for the ISO-9660/High Sierra file and directory names recorded on the CD-ROM. The nmconv option lets you specify how the file and directory names are seen by the user on the host system. Non-ISO-9660 and non-High Sierra names are not converted. The default is defined by variable cdfs_InitialNmConv in /etc/conf/pack.d/cdfs/space.c.

a is some combination of the following:

c

Names are not converted; the names used are the ones recorded on the CD-ROM.

l

Converts upper case letters to lower case.

m

Suppresses the version number and the separator (;). See the cdmntsuppl(1M) page for more information.

dsearch=b

Defines how the directory's search permissions (the execute bit) are to be determined. b is one of the following:

x

Search permission is granted only if the user has execute permissions (as recorded on the CD-ROM or using the dperm option above). See the cdmntsuppl(1M) command for more information.

s

Search permission is granted only if the user has read or execute permissions (as recorded on the CD-ROM or using the dperm option above). See the cdmntsuppl(1M) command for more information. The default is defined by variable cdfs_InitialDirSearch in /etc/conf/pack.d/cdfs/space.c.

devmap=filename

Maps the CD-ROM major and minor numbers assigned to device nodes to valid host system major and minor numbers. The value for filename is a file that contains one entry for each device file in the form:

   device_file_path  new_major  new_minor

Fields are separated by white space (tabs or spaces) and entries are separated by a new line. Anything beyond the third field in a line is treated as a comment. See the cddevsuppl(1M) command for more information.

Usage

• The set of extensions enabled for processing at mount time. The set can be one of the following:

  • RRIP and/or Joliet

  • Pure ISO-9660/High Sierra (i.e. no extensions)

• The set of extensions that exist on the CD-ROM media or image. The set at a minimum consists of Pure ISO-9660/High Sierra and may also include RRIP and Joliet. (Actually the CD-ROM media or image may contain other extension types but they are not considered in the set since this implementation currently only supports the above mentioned extensions.)

• Applying rules as illustrated by the following table to the set of enabled and existing extensions:

Row Headings are Extensions Enabled to be Processed	Column Headings are Existing Extension on CD-ROM
Pure ISO-9660	Pure ISO-9660 RRIP	Pure ISO-9660 Joliet	Pure ISO-9660 RRIP Joliet
noextend	Pure ISO-9660	Pure ISO-9660	Pure ISO-9660	Pure ISO-9660
rrip	Pure ISO-9660	RRIP	Pure ISO-9660	RRIP
joliet	Pure ISO-9660	Pure ISO-9660	Joliet	Joliet
rrip joliet	Pure ISO-9660	RRIP	Joliet	RRIP
	Active Extension After Mount

 +--------------+---------------------------------------------------------------+
 |Row Headings  |       Column Headings are Existing Extension on CD-ROM        |
 |are           |                                                               |
 |Extensions    |                                                               |
 |Enabled to    |                                                               |
 |be Processed  |                                                               |
 +--------------+---------------+---------------+---------------+---------------+
 |Pure ISO-9660 |               | Pure ISO-9660 | Pure ISO-9660 | Pure ISO-9660 |
 |              |               | RRIP          | Joliet        | RRIP          |
 |              |               |               |               | Joliet        |
 +--------------+---------------+---------------+---------------+---------------+
 |noextend      | Pure ISO-9660 | Pure ISO-9660 | Pure ISO-9660 | Pure ISO-9660 |
 +--------------+---------------+---------------+---------------+---------------+
 |rrip          | Pure ISO-9660 | RRIP          | Pure ISO-9660 | RRIP          |
 +--------------+---------------+---------------+---------------+---------------+
 |joliet        | Pure ISO-9660 | Pure ISO-9660 | Joliet        | Joliet        |
 +--------------+---------------+---------------+---------------+---------------+
 |rrip joliet   | Pure ISO-9660 | RRIP          | Joliet        | RRIP          |
 +--------------+---------------+---------------+---------------+---------------+
 |              |                 Active Extension After Mount                  |
 +--------------+---------------------------------------------------------------+

In summary, if both rrip and joliet are enabled for processing and both rrip and joliet exist on the CD-ROM media or image, rrip takes precedence and will become the Active Extension. This was done for compatibility.

Exit codes

0

Successful completion.

1

The mount point or device file specified does not exist.

1

Device does not contain a CD-ROM filesystem.

1

Access is denied.

2

Only a privileged user can change any settings.

3

Too many user, group, or file mappings. The sys/cdrom.h header file defines the maximum number of mappings allowed. (See the devmap, gidmap, and uidmap options.)

4

Parameter error.

4

Bad format in filename (used when setting/resetting the UID, GID and major/minor numbers).

5

The filename specified with the devmap option is not a device file.

Examples

mounts cdfs read-only, disallows setuid, sets the default directory permissions to 544 (read/execute for owner, read for group and others), and converts upper case filenames to lower case.

References

The X/Open CD-ROM Support Component Preliminary Specification.

Notices