ISDN_SELECT_B_PROTOCOL.ISDN_CONF(D7isdn)

ISDN_SELECT_B_PROTOCOL.ISDN_CONF -- ISDN change protocol confirmation

Synopsis

   #include <sys/stream.h>
   #include <sys/mdi.h>
   #include <sys/types.h>
   #include <sys/scoisdn.h>
   
   typedef struct isdn_select_b_protocol_conf
   {
       isdnPLCI_t   plci;
       isdnInfo_t   info;
   } isdn_select_b_protocol_conf_t;

Description

The ISDN_SELECT_B_PROTOCOL.ISDN_CONF message consists of one M_PROTO(D7str) message block confirming an ISDN_SELECT_B_PROTOCOL.ISDN_REQ(D7isdn) to change the current protocol stack for a physical connection. Any error will be displayed in the info parameter.

Parameters

plci

Physical Link Connection Identifier; see isdnPLCI(D4isdn).

info

additional information elements; see isdnInfo(D4isdn). Valid values are:

ISDN_INFOCODE00_OK: reset initiated
ISDN_INFOCODE20_ESTATE: message not supported in current state
ISDN_INFOCODE20_EPLCI: illegal PLCI (Physical Link Connection Identifier)
ISDN_INFOCODE20_EPARAM: illegal message parameter coding
ISDN_INFOCODE30_B1PROT: B1 protocol not supported
ISDN_INFOCODE30_B2PROT: B2 protocol not supported
ISDN_INFOCODE30_B3PROT: B3 protocol not supported
ISDN_INFOCODE30_B1PARAM: B1 protocol parameter not supported
ISDN_INFOCODE30_B2PARAM: B2 protocol parameter not supported
ISDN_INFOCODE30_B3PARAM: B3 protocol parameter not supported
ISDN_INFOCODE30_BPROTC: B protocol combination not supported

References

Intro(D4isdn), Intro(D7isdn)

ISDN_SELECT_B_PROTOCOL.ISDN_REQ(D7isdn)

``SCO ISDN adapter drivers'' in Developing MDI network adapter drivers