SVR5 and SCO OpenServer 5
M_START(D7str)
M_START, M_STOP, M_STARTI, M_STOPI --
pause or restart device output or input
Description
The M_START and M_STOP messages
request devices to start or stop their output.
The M_STARTI and M_STOPI messages
are similar but are used to start and stop input.
They are intended to produce momentary pauses
in a device's output or input,
not to turn devices on or off.
The message format is not defined by STREAMS
and its use is developer-dependent.
These messages can be considered special cases of
an M_CTL message.
These messages cannot be generated by a user-level process,
and each is always discarded if passed to the Stream head.
Message type
Priority.
Version applicability
ddi:
1, 2, 3, 4, 5, 5mp, 6, 6mp, 7, 7mp, 7.1, 7.1mp, 8, 8mp
oddi:
1, 2, 2mp, 3, 3mp, 4, 4mp, 5, 5mp
Differences between versions
M_START and M_STOP are supported on both
SCO SVR5 2.0 and SCO OpenServer 5 Release 5.
M_STARTI and M_STOPI are supported on SCO SVR5 2.0
but are not supported on SCO OpenServer 5 Release 5.
References
M_CTL(D7str),
streamio
19 June 2005
© 2005 The SCO Group, Inc. All rights reserved.
OpenServer 6 and UnixWare (SVR5) HDK - June 2005