|
|
#include <stropts.h>int getmsg(int fd, struct strbuf *ctlptr, struct strbuf *dataptr, int *flagsp);
int getpmsg(int fd, struct strbuf *ctlptr, struct strbuf *dataptr, int *bandp, int *flagsp);
getmsg retrieves the contents of a message (see Intro(S-osr5)) located at the stream head read queue from a STREAMS file, and places the contents into user specified buffer(s). The message must contain either a data part, a control part, or both. The data and control parts of the message are placed into separate buffers, as described below. The semantics of each part is defined by the STREAMS module that generated the message.
The function getpmsg does the same thing as getmsg, but provides finer control over the priority of the messages received. Except where noted, all information pertaining to getmsg also pertains to getpmsg.
fd specifies a file descriptor referencing an open stream. ctlptr and dataptr each point to a strbuf structure, which contains the following members:
int maxlen; /* maximum buffer length */ int len; /* length of data */ char *buf; /* ptr to buffer */
buf
points to a buffer in which the data or control
information is to be placed, and maxlen
indicates the
maximum number of bytes this buffer can hold. On return,
len
contains the number of bytes of data or control
information actually received, or 0 if there is a zero-length
control or data part, or -1 if no data or control information is
present in the message. flagsp should point to an integer
that indicates the type of message the user is able to receive. This
is described later.
ctlptr is used to hold the control part from the message
and dataptr is used to hold the data part from the
message. If ctlptr (or dataptr) is
NULL or the maxlen
field is -1, the control (or
data) part of the message is not processed and is left on the stream
head read queue. If ctlptr (or dataptr) is not
NULL and there is no corresponding control (or data) part
of the messages on the stream head read queue, len
is set
to -1. If the maxlen
field is set to 0 and there is a
zero-length control (or data) part, that zero-length part is removed
from the read queue and len
is set to 0. If the
maxlen
field is set to 0 and there are more than zero
bytes of control (or data) information, that information is left on
the read queue and len
is set to 0. If the
maxlen
field in ctlptr or dataptr is
less than, respectively, the control or data part of the message,
maxlen
bytes are retrieved. In this case, the remainder of
the message is left on the stream head read queue and a non-zero
return value is provided, as described below under ``Diagnostics''.
By default, getmsg processes the first available message on the stream head read queue. However, a user may choose to retrieve only high priority messages by setting the integer pointed by flagsp to RS_HIPRI. In this case, getmsg processes the next message only if it is a high priority message. If the integer pointed by flagsp is 0, getmsg retrieves any message available on the stream head read queue. In this case, on return, the integer pointed to by flagsp will be set to RS_HIPRI if a high priority message was retrieved, or 0 otherwise.
For getpmsg, the flags are different. flagsp points to a bitmask with the following mutually-exclusive flags defined: MSG_HIPRI, MSG_BAND, and MSG_ANY. Like getmsg, getpmsg processes the first available message on the stream head read queue. A user may choose to retrieve only high-priority messages by setting the integer pointed to by flagsp to MSG_HIPRI and the integer pointed to by bandp to 0. In this case, getpmsg will only process the next message if it is a high-priority message. In a similar manner, a user may choose to retrieve a message from a particular priority band by setting the integer pointed to by flagsp to MSG_BAND and the integer pointed to by bandp to the priority band of interest. In this case, getpmsg will only process the next message if it is in a priority band equal to, or greater than, the integer pointed to by bandp, or if it is a high-priority message. If a user just wants to get the first message off the queue, the integer pointed to by flagsp should be set to MSG_ANY and the integer pointed to by bandp should be set to 0. On return, if the message retrieved was a high-priority message, the integer pointed to by flagsp will be set to MSG_HIPRI and the integer pointed to by bandp will be set to 0. Otherwise, the integer pointed to by flagsp will be set to MSG_BAND and the integer pointed to by bandp will be set to the priority band of the message.
If O_NDELAY and O_NONBLOCK are clear, getmsg blocks until a message of the type specified by flagsp is available on the stream head read queue. If O_NDELAY or O_NONBLOCK has been set and a message of the specified type is not present on the read queue, getmsg fails and sets errno to EAGAIN.
If a hangup occurs on the stream from which messages are to be
retrieved, getmsg continues to operate normally, as
described above, until the stream head read queue is
empty. Thereafter, it returns 0 in the len
fields of
ctlptr and dataptr.
0 indicates that a full message was read successfully.
MORECTL indicates that more control information is waiting for retrieval.
MOREDATA indicates that more data is waiting for retrieval.
(MORECTL | MOREDATA) indicates that both types of information remain.
Subsequent getmsg calls retrieve the remainder of the message. However, if a message of higher priority has come in on the stream head read queue, the next call to getmsg will retrieve that higher priority message before retrieving the remainder of the previously-received partial message.
On failure, getmsg and getpmsg return -1 and set errno to identify the error.
AT&T SVID Issue 3.